How much does tile flooring cost?

Installed tile runs about $7 to $20 per square foot, or roughly $1,800 to $6,000 for a typical room, with labor often the bigger share. DIY materials are about $3 to $8 per square foot, so the savings come from doing the labor yourself.

Can I install tile flooring myself?

Yes, but it is more involved than a floating floor. The skills are prepping a stiff substrate, combing thinset evenly, keeping tiles level and spaced, and grouting cleanly. Start with a small, square room and rent a wet saw.

Do I need backer board under floor tile?

Over wood subfloors, yes, you need cement backer board or an uncoupling membrane so the tile has a stable, crack-resistant base. Tiling directly over plywood almost always leads to cracked grout and loose tile.

Ceramic or porcelain floor tile?

Porcelain is denser, harder, and more water- and wear-resistant, which makes it the better choice for floors and wet areas. Ceramic is cheaper and fine for lighter-traffic floors. For entryways and baths, most pros pick porcelain.

How long does a tile floor take to install?

A typical room takes a weekend or two for a DIYer: prep and backer board one day, setting tile another, then grouting after the thinset cures. Cure times between steps are what stretch the timeline more than the labor itself.

UPDATED JUNE 2026

Tile Flooring Cost in Utah

Locally calibrated hire vs. DIY cost data for tile flooring projects in Utah. Cited sources, permit requirements, and a full build guide, free.

Free tools and guides

Keep going

DIY Cost CalculatorFree

Get a hire vs. DIY range calibrated to your zip in seconds.Open →

Project Blueprints$19.99+

A full localized build plan: materials, tools, permits, steps.Open →

Planning ChecklistsFree

A free step-by-step planning checklist for your project.Open →

Tools & MaterialsFree

The tools and materials worth buying now, with our verdict.Open →

HIRE A PRO

$1,800–$5,900

Fully installed, labor + materials

DIY COST

$700–$2,400

Materials + rentals, your labor free

Moderate

Requires some construction knowledge and proper planning.

Government Data · Government Data · Submitted Quotes (n=0)

How we got these numbers

National benchmark costs from RSMeans, Angi, Fixr, and HomeGuide are adjusted for Utah using two federal datasets: the Bureau of Economic Analysis Regional Price Parity (RPP) index and the Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics. Utah's RPP is 1.0 (national baseline = 100) and its BLS labor adjustment factor is 0.99. Higher RPP means goods and services cost more relative to the national average; the BLS factor scales contractor labor rates to local wage levels. We blend these two adjustments, weighted 40% RPP, 60% BLS labor, to produce the ranges shown above.

adjusted_cost = national_benchmark × (0.4 × RPP/100 + 0.6 × bls_labor_adj)

RPP(Utah) = 1.0 · BLS adj = 0.99

Full methodology →

What's included

Item	Qty	Unit Cost	Subtotal
Floor tile	sq ft plus 15 percent	$3.5	$700
Cement backer board or membrane	to cover area	$1	$200
Thinset mortar	bags as needed	$18	$90
Grout, spacers, and sealer	1 set	$90	$90
Materials Total			$1,080

Tools you'll need

See the tools we'd buy →

TOOLS YOU PROBABLY OWN

Notched trowel and grout float
Level, spacers, and bucket

TOOLS TO RENT OR BUY

Wet tile saw
Rent for one job, buy if you tile often

Build sequence

1
Confirm the subfloor is stiff and flat, then install backer board or an uncoupling membrane.
COMMON MISTAKE
Tiling over a bouncy floor leads to cracked tile and grout.
2
Dry-lay tiles to plan the layout and avoid thin slivers at the walls.
3
Comb thinset with a notched trowel and set tiles with even spacers.
COMMON MISTAKE
Too little thinset coverage leaves hollow spots that crack under load.
4
Let the thinset cure, then mix and float grout into the joints.
5
Clean the haze, let it cure, and seal the grout if needed.

Permits and code requirements

PERMIT REQUIREMENTS

Permit rules for tile flooring vary by city and county in Utah. Most structural, electrical, plumbing, or mechanical work needs a permit and an inspection. Confirm with your local building department, or see the Utah guide for specifics.

PERMIT THRESHOLD

Varies by municipality

Disclaimer: Always verify permit requirements with your local building department before starting work. Requirements vary by municipality and are updated periodically.

Frequently asked questions

NEXT STEPS

Ready to move forward?

Get the complete step-by-step Blueprint or connect with a vetted local pro in Utah.

Get the full Project Blueprint, $19.99 Find a Local Pro in Utah →

No lead-genCited sourcesNo upsellsFree foreverUpdated quarterlyReal quotesNo spam

UPDATED JUNE 2026