How much does a bathroom vanity installation cost?

Installing a vanity runs about $400 to $1,500 depending on size and whether a pro supplies it, with double vanities and stone tops higher. DIY is mostly the cost of the vanity and top, roughly $200 to $1,200, since the labor is manageable for an intermediate DIYer.

Can I install a bathroom vanity myself?

Yes, replacing a vanity in the same location is a good intermediate DIY. It blends light carpentry, setting and leveling the cabinet, with basic plumbing for the faucet and drain. Moving the plumbing to a new spot is what raises the difficulty toward pro territory.

How do I connect the plumbing to a new vanity?

You reconnect the supply lines to the faucet, assemble the drain and P-trap from the sink to the wall drain, and check that everything lines up and seals. If the new sink sits at a different height, you may need to adjust the trap, which is the fiddliest part.

Do I need to anchor a vanity to the wall?

Yes, a vanity should be screwed into wall studs, not just drywall, because it carries the weight of the top, sink, and water, plus people leaning on it. Find the studs, shim the cabinet level, and anchor through the back rail into solid framing.

How long does it take to install a vanity?

A straightforward same-location replacement is usually a half-day to a day for a DIYer, longer for a double vanity or stone top that needs careful handling. Relocating the plumbing or patching walls and floors behind the old vanity adds time.

UPDATED JUNE 2026

Bathroom Vanity Installation Cost in South Carolina

Locally calibrated hire vs. DIY cost data for bathroom vanity installation projects in South Carolina. Cited sources, permit requirements, and a full build guide, free.

Free tools and guides

Keep going

DIY Cost CalculatorFree

Get a hire vs. DIY range calibrated to your zip in seconds.Open →

Project Blueprints$19.99+

A full localized build plan: materials, tools, permits, steps.Open →

Planning ChecklistsFree

A free step-by-step planning checklist for your project.Open →

Tools & MaterialsFree

The tools and materials worth buying now, with our verdict.Open →

HIRE A PRO

$400–$1,300

Fully installed, labor + materials

DIY COST

$200–$1,100

Materials + rentals, your labor free

Moderate

Requires some construction knowledge and proper planning.

Government Data · Government Data · Submitted Quotes (n=0)

How we got these numbers

National benchmark costs from RSMeans, Angi, Fixr, and HomeGuide are adjusted for South Carolina using two federal datasets: the Bureau of Economic Analysis Regional Price Parity (RPP) index and the Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics. South Carolina's RPP is 0.9 (national baseline = 100) and its BLS labor adjustment factor is 0.89. Higher RPP means goods and services cost more relative to the national average; the BLS factor scales contractor labor rates to local wage levels. We blend these two adjustments, weighted 40% RPP, 60% BLS labor, to produce the ranges shown above.

adjusted_cost = national_benchmark × (0.4 × RPP/100 + 0.6 × bls_labor_adj)

RPP(South Carolina) = 0.9 · BLS adj = 0.89

Full methodology →

What's included

Item	Qty	Unit Cost	Subtotal
Vanity cabinet	1	$400	$400
Vanity top and sink	1	$250	$250
Faucet and drain assembly	1 set	$120	$120
P-trap, supply lines, and caulk	1 set	$50	$50
Materials Total			$820

Tools you'll need

See the tools we'd buy →

TOOLS YOU PROBABLY OWN

Drill, level, and stud finder
Basin wrench and pliers
Caulk gun and bucket

TOOLS TO RENT OR BUY

Build sequence

1
Shut off the water, disconnect the plumbing, and remove the old vanity and top.
2
Mark the plumbing locations and check the wall for level and studs.
3
Set the cabinet, shim it level, and anchor it to the studs.
COMMON MISTAKE
Anchoring to drywall alone so the heavy vanity pulls loose.
4
Install the top and sink, then mount the faucet and connect the drain and supply.
COMMON MISTAKE
A poorly aligned P-trap that drips or will not seal.
5
Caulk the top to the wall, restore water, and check every joint for leaks.

Permits and code requirements

PERMIT REQUIREMENTS

Permit rules for bathroom vanity installation vary by city and county in South Carolina. Most structural, electrical, plumbing, or mechanical work needs a permit and an inspection. Confirm with your local building department, or see the South Carolina guide for specifics.

PERMIT THRESHOLD

Varies by municipality

Disclaimer: Always verify permit requirements with your local building department before starting work. Requirements vary by municipality and are updated periodically.

Frequently asked questions

NEXT STEPS

Ready to move forward?

Get the complete step-by-step Blueprint or connect with a vetted local pro in South Carolina.

Get the full Project Blueprint, $19.99 Find a Local Pro in South Carolina →

No lead-genCited sourcesNo upsellsFree foreverUpdated quarterlyReal quotesNo spam

UPDATED JUNE 2026