Metal Roofing Cost in Pennsylvania
Locally calibrated hire vs. DIY cost data for metal roofing projects in Pennsylvania. Cited sources, permit requirements, and a full build guide, free.
Free tools and guides
Keep going
HIRE A PRO
$11,800–$29,600
Fully installed, labor + materials
DIY COST
$6,800–$15,600
Materials + rentals, your labor free
Complex project, structural or code-critical work involved.
Government Data · Government Data · Submitted Quotes (n=0)
How we got these numbers
National benchmark costs from RSMeans, Angi, Fixr, and HomeGuide are adjusted for Pennsylvania using two federal datasets: the Bureau of Economic Analysis Regional Price Parity (RPP) index and the Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics. Pennsylvania's RPP is 1.0 (national baseline = 100) and its BLS labor adjustment factor is 1.00. Higher RPP means goods and services cost more relative to the national average; the BLS factor scales contractor labor rates to local wage levels. We blend these two adjustments, weighted 40% RPP, 60% BLS labor, to produce the ranges shown above.
adjusted_cost = national_benchmark × (0.4 × RPP/100 + 0.6 × bls_labor_adj)
RPP(Pennsylvania) = 1.0 · BLS adj = 1.00
What's included
| Item | Qty | Unit Cost | Subtotal |
|---|---|---|---|
| Metal roofing panels | about 1,700 sq ft | $5 | $8,500 |
| Underlayment | 1,700 sq ft | $0.5 | $850 |
| Flashing, trim, and closures | 1 set | $900 | $900 |
| Fasteners and sealant | 1 set | $350 | $350 |
| Materials Total | $10,600 | ||
Tools you'll need
See the tools we'd buy →TOOLS YOU PROBABLY OWN
- Drill and impact driver
TOOLS TO RENT OR BUY
Roofing safety harness
Buy proper fall protection, non-negotiable
Metal snips and seamer
Seamer needed for standing seam
Build sequence
- 1
Inspect or replace the decking and install underlayment.
COMMON MISTAKE
Covering damaged decking traps problems under a 50-year roof.
- 2
Install eave, valley, and edge flashing.
- 3
Set and align the panels square, working up the roof.
- 4
Seam or fasten the panels per the system, keeping rows straight.
COMMON MISTAKE
Overdriving exposed fasteners crushes the washers and causes leaks.
- 5
Install ridge cap, trim, and closures, and seal penetrations.
Permits and code requirements
PERMIT REQUIREMENTS
Permit rules for metal roofing vary by city and county in Pennsylvania. Most structural, electrical, plumbing, or mechanical work needs a permit and an inspection. Confirm with your local building department, or see the Pennsylvania guide for specifics.
PERMIT THRESHOLD
Varies by municipality
Disclaimer: Always verify permit requirements with your local building department before starting work. Requirements vary by municipality and are updated periodically.
Frequently asked questions
NEXT STEPS
Ready to move forward?
Get the complete step-by-step Blueprint or connect with a vetted local pro in Pennsylvania.
UPDATED JUNE 2026