How much does wallpaper installation cost?

Professional wallpaper hanging runs about $500 to $2,500 for a room depending on size, pattern, and paper, often $3 to $7 per square foot for labor plus materials. DIY is the paper alone, roughly $100 to $800, since the labor is the bulk of the cost.

Can I hang wallpaper myself?

Yes, especially peel-and-stick paper on a single accent wall, which is very beginner-friendly. Traditional paste papers and full rooms with pattern matching take more patience and a steady hand. Good wall prep and starting from a plumb line are what make it look professional.

Is peel-and-stick or traditional wallpaper better?

Peel-and-stick is easier to hang and remove, ideal for renters and beginners, but can lift at seams over time. Traditional paste paper is more durable and seamless when done well, but harder to install and remove. Choose by skill, permanence, and whether you rent.

Do I need to prime before wallpaper?

Yes, priming gives the paper a smooth, sealed surface to grip and makes future removal far easier without damaging the drywall. Hanging over bare, patched, or glossy walls leads to lifting seams and torn drywall when you eventually take it down.

How do I avoid bubbles in wallpaper?

Smooth each strip from the center outward toward the edges with a wallpaper brush or smoother, pushing air and excess paste to the seams. Work in one direction, and prick any stubborn small bubbles with a pin and smooth them flat before the paste sets.

UPDATED JUNE 2026

Wallpaper Installation Cost in Oregon

Locally calibrated hire vs. DIY cost data for wallpaper installation projects in Oregon. Cited sources, permit requirements, and a full build guide, free.

Free tools and guides

Keep going

DIY Cost CalculatorFree

Get a hire vs. DIY range calibrated to your zip in seconds.Open →

Project Blueprints$19.99+

A full localized build plan: materials, tools, permits, steps.Open →

Planning ChecklistsFree

A free step-by-step planning checklist for your project.Open →

Tools & MaterialsFree

The tools and materials worth buying now, with our verdict.Open →

HIRE A PRO

$500–$2,700

Fully installed, labor + materials

DIY COST

$100–$800

Materials + rentals, your labor free

Moderate

Requires some construction knowledge and proper planning.

Government Data · Government Data · Submitted Quotes (n=0)

How we got these numbers

National benchmark costs from RSMeans, Angi, Fixr, and HomeGuide are adjusted for Oregon using two federal datasets: the Bureau of Economic Analysis Regional Price Parity (RPP) index and the Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics. Oregon's RPP is 1.0 (national baseline = 100) and its BLS labor adjustment factor is 1.10. Higher RPP means goods and services cost more relative to the national average; the BLS factor scales contractor labor rates to local wage levels. We blend these two adjustments, weighted 40% RPP, 60% BLS labor, to produce the ranges shown above.

adjusted_cost = national_benchmark × (0.4 × RPP/100 + 0.6 × bls_labor_adj)

RPP(Oregon) = 1.0 · BLS adj = 1.10

Full methodology →

What's included

Item	Qty	Unit Cost	Subtotal
Wallpaper rolls	wall area plus waste	$40	$240
Wallpaper paste (if not pre-pasted)	1	$25	$25
Primer or wallpaper size	1	$30	$30
Smoothing and seam tools	1 set	$25	$25
Materials Total			$320

Tools you'll need

See the tools we'd buy →

TOOLS YOU PROBABLY OWN

Smoothing brush and seam roller
Sharp knife and straightedge
Level, tape, and sponge

TOOLS TO RENT OR BUY

Build sequence

1
Clean and smooth the wall, fill holes, and prime so the paper adheres and removes cleanly.
COMMON MISTAKE
Hanging over a dirty or glossy wall so seams lift.
2
Mark a true vertical plumb line to start the first strip straight.
COMMON MISTAKE
Starting off a crooked corner so the pattern drifts across the wall.
3
Cut strips with extra length and match the pattern between them.
4
Hang each strip, smoothing from the center out to push air and wrinkles to the edges.
5
Trim the excess at top and bottom, roll the seams, and wipe off paste.

Permits and code requirements

PERMIT REQUIREMENTS

Permit rules for wallpaper installation vary by city and county in Oregon. Most structural, electrical, plumbing, or mechanical work needs a permit and an inspection. Confirm with your local building department, or see the Oregon guide for specifics.

PERMIT THRESHOLD

Varies by municipality

Disclaimer: Always verify permit requirements with your local building department before starting work. Requirements vary by municipality and are updated periodically.

Frequently asked questions

NEXT STEPS

Ready to move forward?

Get the complete step-by-step Blueprint or connect with a vetted local pro in Oregon.

Get the full Project Blueprint, $19.99 Find a Local Pro in Oregon →

No lead-genCited sourcesNo upsellsFree foreverUpdated quarterlyReal quotesNo spam

UPDATED JUNE 2026