Kitchen Remodel Cost in New York
Locally calibrated hire vs. DIY cost data for kitchen remodel projects in New York. Cited sources, permit requirements, and a full build guide, free.
Free tools and guides
Keep going
HIRE A PRO
$22,000–$65,000
Fully installed, labor + materials
DIY COST
$8,000–$22,000
Materials + rentals, your labor free
Complex project, structural or code-critical work involved.
RSMeans · Angi · Fixr · Submitted Quotes · Government Data · Submitted Quotes (n=43)
How we got these numbers
National benchmark costs from RSMeans, Angi, Fixr, and HomeGuide are adjusted for New York using two federal datasets: the Bureau of Economic Analysis Regional Price Parity (RPP) index and the Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics. New York's RPP is 1.2 (national baseline = 100) and its BLS labor adjustment factor is 1.28. Higher RPP means goods and services cost more relative to the national average; the BLS factor scales contractor labor rates to local wage levels. We blend these two adjustments, weighted 40% RPP, 60% BLS labor, to produce the ranges shown above.
adjusted_cost = national_benchmark × (0.4 × RPP/100 + 0.6 × bls_labor_adj)
RPP(New York) = 1.2 · BLS adj = 1.28
What's included
| Item | Qty | Unit Cost | Subtotal |
|---|---|---|---|
| Semi-custom cabinets (10×12 kitchen) | 1 set | $4,500 | $4,500 |
| Quartz countertop (30 sq ft installed) | 30 sq ft | $85 | $2,550 |
| Subway tile backsplash (3×6 in) | 40 sq ft | $4 | $160 |
| Tile adhesive + grout | 2 sets | $35 | $70 |
| LVP flooring (120 sq ft + 10% waste) | 132 sq ft | $3.5 | $462 |
| Undermount stainless sink + faucet | 1 | $380 | $380 |
| Cabinet hardware (pulls, 30-pack) | 1 | $85 | $85 |
| Under-cabinet LED lighting kit | 1 | $120 | $120 |
| Paint + primer (kitchen-grade) | 2 gallons | $45 | $90 |
| Materials Total | $8,417 | ||
Tools you'll need
See the tools we'd buy →TOOLS YOU PROBABLY OWN
- Drill / impact driver
- Circular saw or miter saw
- Level (4 ft)
- Jigsaw (for sink cutout)
- Stud finder
- Pry bar and oscillating tool
- Caulk gun
TOOLS TO RENT OR BUY
Tile saw (wet saw)
Rent for ~$60/day; buying a quality wet saw runs $200–$400.
Build sequence
- 1
Plan layout, order cabinets and countertops; countertop templates are cut after cabinets are installed.
- 2
Shut off water and gas; remove appliances, then existing cabinets and countertops.
- 3
Repair drywall, address any moisture or mold found behind cabinets.
- 4
Rough-in any new electrical circuits (20A for countertop outlets, dedicated circuits for dishwasher and microwave).
COMMON MISTAKE
Adding outlets without a permit is a common code violation flagged at home inspection.
- 5
Install upper cabinets first, then base cabinets; shim level and plumb.
- 6
Have countertop fabricator template; install countertops after cabinets are confirmed level.
- 7
Install sink, faucet, and garbage disposal; reconnect plumbing.
- 8
Install backsplash tile; grout and seal after 24 hours.
- 9
Install flooring (typically after cabinets to avoid gaps at toe kicks).
- 10
Install appliances, hardware, lighting, and paint.
Permits and code requirements
PERMIT REQUIREMENTS
New York City requires permits for any kitchen work involving plumbing, electrical, or structural changes, including cabinet removal that exposes walls. NYC DOB (Department of Buildings) enforces this strictly; unpermitted work discovered during a co-op or condo sale can block the transaction. Upstate New York municipalities have more relaxed requirements but still require permits for plumbing and electrical work.
PERMIT THRESHOLD
Any plumbing, electrical, or structural work, NYC enforces strictly
CODE REFERENCE
https://www.nyc.gov/site/buildings/index.pageDisclaimer: Always verify permit requirements with your local building department before starting work. Requirements vary by municipality and are updated periodically.
Frequently asked questions
NEXT STEPS
Ready to move forward?
Get the complete step-by-step Blueprint or connect with a vetted local pro in New York.
UPDATED JUNE 2026